102 lines
6.5 KiB
Bash
102 lines
6.5 KiB
Bash
#!/bin/bash
|
||
# 定时设置：*/10 * * * * /bin/bash /root/kp.sh 每10分钟运行一次
|
||
# serv00变量添加规则：
|
||
# 推荐:为确保节点可用性，建议在Serv00网页不设置端口，脚本会随机生成有效端口，首次运行会中断SSH，请把RES设置为n再执行即可
|
||
# RES(必填)：n表示每次不重置部署，y表示每次重置部署。REP(必填)：n表示不重置随机端口(三个端口留空)，y表示重置端口(三个端口留空)。SSH_USER(必填)表示serv00账号名。SSH_PASS(必填)表示serv00密码。REALITY表示reality域名(留空表示serv00官方域名：你serv00账号名.serv00.net)。SUUID表示uuid(留空表示随机uuid)。TCP1_PORT表示vless的tcp端口(留空表示随机tcp端口)。TCP2_PORT表示vmess的tcp端口(留空表示随机tcp端口)。UDP_PORT表示hy2的udp端口(留空表示随机udp端口)。HOST(必填)表示登录serv00服务器域名。ARGO_DOMAIN表示argo固定域名(留空表示临时域名)。ARGO_AUTH表示argo固定域名token(留空表示临时域名)。
|
||
# 必填变量：RES、REP、SSH_USER、SSH_PASS、HOST
|
||
# 注意[]"",:这些符号不要乱删，按规律对齐
|
||
# 每行一个{serv00服务器}，一个服务也可，末尾用,间隔，最后一个服务器末尾无需用,间隔
|
||
ACCOUNTS='[
|
||
{"RES":"n", "REP":"n", "SSH_USER":"你的serv00账号名", "SSH_PASS":"你的serv00账号密码", "REALITY":"你serv00账号名.serv00.net", "SUUID":"自设UUID", "TCP1_PORT":"vless的tcp端口", "TCP2_PORT":"vmess的tcp端口", "UDP_PORT":"hy2的udp端口", "HOST":"s1.serv00.com", "ARGO_DOMAIN":"", "ARGO_AUTH":""},
|
||
{"RES":"y", "REP":"y", "SSH_USER":"123456", "SSH_PASS":"7890000", "REALITY":"time.is", "SUUID":"73203ee6-b3fa-4a3d-b5df-6bb2f55073ad", "TCP1_PORT":"", "TCP2_PORT":"", "UDP_PORT":"", "HOST":"s16.serv00.com", "ARGO_DOMAIN":"你的argo固定域名", "ARGO_AUTH":"eyJhIjoiOTM3YzFjYWI88552NTFiYTM4ZTY0ZDQzRmlNelF0TkRBd1pUQTRNVEJqTUdVeCJ9"}
|
||
]'
|
||
run_remote_command() {
|
||
local RES=$1
|
||
local REP=$2
|
||
local SSH_USER=$3
|
||
local SSH_PASS=$4
|
||
local REALITY=${5}
|
||
local SUUID=$6
|
||
local TCP1_PORT=$7
|
||
local TCP2_PORT=$8
|
||
local UDP_PORT=$9
|
||
local HOST=${10}
|
||
local ARGO_DOMAIN=${11}
|
||
local ARGO_AUTH=${12}
|
||
if [ -z "${ARGO_DOMAIN}" ]; then
|
||
echo "Argo域名为空，申请Argo临时域名"
|
||
else
|
||
echo "Argo已设置固定域名：${ARGO_DOMAIN}"
|
||
fi
|
||
remote_command="export reym=$REALITY UUID=$SUUID vless_port=$TCP1_PORT vmess_port=$TCP2_PORT hy2_port=$UDP_PORT reset=$RES resport=$REP ARGO_DOMAIN=${ARGO_DOMAIN} ARGO_AUTH=${ARGO_AUTH} && bash <(curl -Ls https://raw.githubusercontent.com/yonggekkk/sing-box-yg/main/serv00keep.sh)"
|
||
echo "Executing remote command on $HOST as $SSH_USER with command: $remote_command"
|
||
sshpass -p "$SSH_PASS" ssh -o StrictHostKeyChecking=no "$SSH_USER@$HOST" "$remote_command"
|
||
}
|
||
if cat /etc/issue /proc/version /etc/os-release 2>/dev/null | grep -q -E -i "openwrt"; then
|
||
opkg update
|
||
opkg install sshpass curl jq
|
||
else
|
||
if [ -f /etc/debian_version ]; then
|
||
package_manager="apt-get install -y"
|
||
apt-get update >/dev/null 2>&1
|
||
elif [ -f /etc/redhat-release ]; then
|
||
package_manager="yum install -y"
|
||
elif [ -f /etc/fedora-release ]; then
|
||
package_manager="dnf install -y"
|
||
elif [ -f /etc/alpine-release ]; then
|
||
package_manager="apk add"
|
||
fi
|
||
$package_manager sshpass curl jq cron >/dev/null 2>&1 &
|
||
fi
|
||
echo "*****************************************************"
|
||
echo "*****************************************************"
|
||
echo "甬哥Github项目 ：github.com/yonggekkk"
|
||
echo "甬哥Blogger博客 ：ygkkk.blogspot.com"
|
||
echo "甬哥YouTube频道 ：www.youtube.com/@ygkkk"
|
||
echo "自动远程部署Serv00三合一协议脚本【VPS+软路由】"
|
||
echo "版本：V25.2.26"
|
||
echo "*****************************************************"
|
||
echo "*****************************************************"
|
||
count=0
|
||
for account in $(echo "${ACCOUNTS}" | jq -c '.[]'); do
|
||
count=$((count+1))
|
||
RES=$(echo $account | jq -r '.RES')
|
||
REP=$(echo $account | jq -r '.REP')
|
||
SSH_USER=$(echo $account | jq -r '.SSH_USER')
|
||
SSH_PASS=$(echo $account | jq -r '.SSH_PASS')
|
||
REALITY=$(echo $account | jq -r '.REALITY')
|
||
SUUID=$(echo $account | jq -r '.SUUID')
|
||
TCP1_PORT=$(echo $account | jq -r '.TCP1_PORT')
|
||
TCP2_PORT=$(echo $account | jq -r '.TCP2_PORT')
|
||
UDP_PORT=$(echo $account | jq -r '.UDP_PORT')
|
||
HOST=$(echo $account | jq -r '.HOST')
|
||
ARGO_DOMAIN=$(echo $account | jq -r '.ARGO_DOMAIN')
|
||
ARGO_AUTH=$(echo $account | jq -r '.ARGO_AUTH')
|
||
if sshpass -p "$SSH_PASS" ssh -o StrictHostKeyChecking=no "$SSH_USER@$HOST" -q exit; then
|
||
echo "🎉恭喜！✅第【$count】台服务器连接成功！🚀服务器地址：$HOST ，账户名：$SSH_USER"
|
||
if [ -z "${ARGO_DOMAIN}" ]; then
|
||
check_process="ps aux | grep '[c]onfig' > /dev/null && ps aux | grep [l]ocalhost:$TCP2_PORT > /dev/null"
|
||
else
|
||
check_process="ps aux | grep '[c]onfig' > /dev/null && ps aux | grep '[t]oken $ARGO_AUTH' > /dev/null"
|
||
fi
|
||
if ! sshpass -p "$SSH_PASS" ssh -o StrictHostKeyChecking=no "$SSH_USER@$HOST" "$check_process" || [[ "$RES" =~ ^[Yy]$ ]]; then
|
||
echo "⚠️检测到主进程或者argo进程未启动，或者执行重置"
|
||
echo "⚠️现在开始修复或重置部署……请稍等"
|
||
output=$(run_remote_command "$RES" "$REP" "$SSH_USER" "$SSH_PASS" "${REALITY}" "$SUUID" "$TCP1_PORT" "$TCP2_PORT" "$UDP_PORT" "$HOST" "${ARGO_DOMAIN}" "${ARGO_AUTH}")
|
||
echo "远程命令执行结果：$output"
|
||
else
|
||
echo "🎉恭喜！✅检测到所有进程正常运行中 "
|
||
SSH_USER_LOWER=$(echo "$SSH_USER" | tr '[:upper:]' '[:lower:]')
|
||
sshpass -p "$SSH_PASS" ssh -o StrictHostKeyChecking=no "$SSH_USER@$HOST" "
|
||
echo \"配置显示如下：\"
|
||
cat domains/${SSH_USER_LOWER}.serv00.net/logs/list.txt
|
||
echo \"====================================================\""
|
||
fi
|
||
else
|
||
echo "===================================================="
|
||
echo "💥杯具！❌第【$count】台服务器连接失败！🚀服务器地址：$HOST ，账户名：$SSH_USER"
|
||
echo "⚠️可能账号名、密码、服务器名称输入错误，或者当前服务器在维护中"
|
||
echo "===================================================="
|
||
fi
|
||
done
|